Day Two Power

Field notes  /  Extension cords

Why I keep three 25-foot extension cords

I can leave the HomePower 3600 Plus in one spot and bring an outlet to the desk where I need it.

By Tony Davis  ·  Pacific Northwest

HomePower 3600 Plus
A coiled extension cord with three outlets together at the far end
Three-outlet cord shown as an example, from Southwire

When the power goes out, the spot where I want the 3600 to sit and the spot where I want to use my laptop can be 25 feet apart. That’s why I keep three good extension cords with my outage gear. Each is 25 feet long, with three outlets together at the far end.

Say I’m working at the table. One cord gets me there. I can plug in the laptop when its battery gets low, use a small desk lamp while I’m reading, then turn the lamp off when I’m done. If I need power somewhere else, I can run a second cord directly from the station and leave the first one in place.

Three outlets share one cord’s rating

Add up the input amps on the labels of the devices you’ll use together. Keep that sum within both the cord’s amp rating and the rating of the station outlet it plugs into. Across all the cords, everything running at once also has to fit within the station’s total AC output. A spare socket is handy, but it’s the labels that tell you what you can plug in.

Try the route before the outage

Start with one place you’ll actually want power. From there, check whether a single cord can reach the station while staying clear of foot traffic, doorways and rugs. That walk will tell you whether one good cord covers your setup or a second or third would earn its place. Use a cord rated for the job, check it for damage, and plug each run directly into the station.

Extension cord safety tips from the Electrical Safety Foundation

All field notes